Gregorian Solid Copper Cowboy Hat Western Motiff This is a terrific burnished cowboy hat handcrafted from solid copper by Gregorian, USA.

Piece measures 5 inches from front to back, 4 3/4 inches across, and about 2 1/2 inches tall to the top of the hat. Hat has the Gregorian, Made in USA hallmark label under the base. There are three felt pads in place to protect your display surface.

So, partner, here’s an opportunity to add a hand-hammered copper cowboy hat to your Western collection.
 

Copper Calling Card/Tip Tray N.Y. Skyline Decor Just a wonderful copper patina on this vintage tip or calling card tray.

Measuring 7 1/4 inches wide and 5 inches from front to back, the tray has petite open metal handle ornamentation on top with a centered recessed area of the New York skyline, cast copper and painted to highlight the scene.

The Empire State Building, Madison Square Garden, Skyscrapers, La Guardia, and Kennedy Airports are all part of this vibrant, vivid N.Y. scene. Small raised copper V-shapes keep the base of the tray from sitting directly on the table surface.

No markings as to manufacturer are present; just quality of design and craftsmanship on this vintage tray.
 

Vintage Solid Bronze Figural Wolf Door Knocker The full figured solid bronze wolf measures 6 1/2 inches tall and has a width of 2 1/4 inches from one ear to another. He has a fine burnished appearance with detailed features that make him come alive. Long legs and tail with the wolf’s head door knocker positioned in the center give him a complete look.

There are two pre-drilled holes ready for mounting screws and there will be a wolf at your door.

This bronze knocker is in terrific vintage condition without any dents or dings to mar his appearance.
 

Carson Statesmetal Pewter Potpourri Bowl & Stand-Apples A marvelous pewter potpourri holder/bowl with stand from the Carson Company of Freeport, PA.

The stand is 2 1/4 inches tall and has a 2 3/4 inch diameter. The bowl measures 2 1/4 inches tall and is 5 inches by 5 1/2 inches. The front and back portion of the flaring rim has an open metalwork pattern featuring apples and leaves.

This pewter piece carries the Carson name under the base of the bowl and appears to be in unused, excellent condition.
 

Detailed Solid Brass Casting Giraffe Statue/Figurine This terrific brass giraffe weighs in at 2 pounds 4 ounces. He is a sturdy animal with sharply defined features and a darkened patina over the brass.

The giraffe is 8 1/4 inches to the top of his neck and 8 1/2 inches from his head to his tail. He is looking over at you with fine embedded etching for his eyes, mouth nostrils, ears, body, tail, and hooves.

Although maker’s marks are not present, this brass giraffe is a wonderfully crafted animal for any collector to own and display.
 

Vintage Meeuws & Zoon Holland Pewter Tea Pot For your consideration, we offer this Meeuws & Zoon, made in Holland teapot, standing 7 inches tall with a 6 1/2 width across the widest point. The vintage teapot has a heavy, lift-off lid, with an arched, tightly woven brown and black handle.

There are no dents, dings, or warping on this Meeuws teapot, and although this piece can be polished by the purchaser if so desired, we have left the old pewter patina intact.
 

Vintage Cast Iron Pot Belly Wood Burning Stove – Blaze This is a terrific find at an estate sale for a cast iron wood burning stove manufactured more than sixty years ago. The sixty plus year old gentleman who was selling his mother’s estate stated that the cast iron stove had been in his parent’s home from his earliest memory as a young boy.

The pot belly stove stands 7 3/4 inches tall and measures 4 1/4 inches wide on four paw style feet. The name Blaze is embossed on the front of the stove.

In searching for the origin of this piece, we found two cast iron manufacturers using Blaze as part of their identity. One is actually located in England, but seems to make only full size wood burning stoves. The other, Blaze King, has been in business in the United States for over 70 years so this could fit time line but could find no miniatures currently being made.
 

GES.Gesch Pewter Horse and Carriage Plate JMN Company Bearing the Fein Zinn, Fine Pewter touchmark of an archangel with balance scales of justice in the left hand, this German made pewter plate measures 9 1/8 inches in diameter. The edge is scalloped and double-banded.

The recessed 6 1/4 inch in diameter center portion of the plate has a finely detailed horse and carriage scene (which resembles Cinderella’s coach in appearance). Most likely, the driver has arrived at the church for a wedding ceremony.

Beneath the scene are entwined wedding rings set among a floral treatment. A 2 inch banner area would allow for personal engraving, if desired (engraving service not provided).

The back of plate has the GES.Gesch wording along with 114A. Above those words is an embossed beaded circle with an inner crest/shield design and the initials, JMN. The archangel with the balance scales is centered above the beaded circle. This touchmark is one of two symbols recognized by the German Pewter Guild for exceptional quality.

There are areas of light wear and scratching on this plate, but overall it is in fine vintage condition without dents or dings. A sturdy pewter hanger makes this terrific plate ready for display.
 

Crescent Pewter Creamer and Open Sugar Bowl The creamer in this set is 4 inches tall and measures 4 3/4 inches from the spout to the end of the handle. The dual handled open sugar stands 3 1/2 inches tall and has an opening width of 5 inches.

Both of these pewter pieces are in fine vintage condition, and are ready for practical use or as terrific pewter display pieces.
 

Pewter Deer Plate Doe & Fawn in Woodland Setting A quality 8 3/4 inch in diameter pewter plate with double banded scalloped edging and an embossed/raised 6 1/4 inch central design of a doe with her fawn in a wooded setting.

In fine vintage condition, with some light wear and scratching, the plate has a touchmark angel symbol with trumpet/horn in a beaded oval.

The backside has an open metal hanger making this plate display ready.
 

Eagle on Tree Branch Pewter Plate Angel Touchmark Well-crafted 8 3/4 inch in diameter pewter plate with scalloped edging and double banded treatment.

The 6 inch recessed central design is that of an eagle with fan like feather and fine detailing perched on a tree branch.

A touchmark angel is set within an oval garland on the backside, and there is a metal hanger incorporated into the plate, making this pewter piece ready for display. Only light wear on this terrific eagle design pewter.
 

Vintage Omscolite Table Lighter with Under Tray-Japan The Omscolite oval table lighter stands 2 1/2 inches tall on a pedestal base and is done in silver tone with a nail head design on the body and base.

The shell-shaped 7 inch wide by 5 1/2 inch long tray has a similar nail head appearance on the side handles, and from center oval recess to the opposite side.

Both pieces are marked and are in marvelous, minimally used condition.
 

Leonard Silverplate Fish Design Trivet/Wall Hanger Measuring 10 1/4 inches long by 6 1/2 inches wide, this open metal fish design trivet/wall hanger is sure to please.

There are 6 rubber tipped metal feet under the base for elevating the trivet above a table surface. A hanger is also in place on the backside if you would like to display as a wall hanger.

Either way, this trivet is a winner, with the Leonard name on the backside, and it is in fine vintage condition.
 

Sexton Cast Aluminum Metal Carriage/Buggy Wall Hanging This terrific Sexton cast aluminum horseless carriage measures 11 inches long and is 6 1/2 inches tall. Vintage piece with the large wheels, great for display along with other early automobile memorabilia.

Marked on the backside with the Sexton, USA name and the initials WF in a square (the artist’s initials?), this metal art is in fine vintage condition with wear appropriate for its age.
 

Wilton Pewter Liberty Bell Wine Holder/Caddy/Server Measuring 6 3/4 inches in diameter, this Wilton Pewter piece has a recessed central area that is 4 1/4 inches across, with a depth of 1 1/2 inches.

The wine holder has a raised medallion of the Liberty Bell on the edging. The Wilton name and logo are present under the base and there is a felt piece to protect your table surface.

The pewter ware is in very good condition, with no pitting or staining.